15 Gallon You-Build "EZ KIT" Copper Moonshine Still

Regular price $ 549.00

Tax included.

15 Gallon "EZ KIT" MOONSHINE KIT

Copper Moonshine Still

FREE SHIPPING TO CONTINENTAL USA - PRICE INCLUDES THE SHIPPING COST

15 Gallon Capacity - 15.5" Diameter

3 Gallon Thumper

3 Gallon Worm

3/8" Coil

You Solder EZ Kit - This unit comes with everything you need to build a copper moonshine still. This comes with all of the fittings, solder,flux an pipe and much MORE...

A do-it-yourself kit (DIY) is a copper moonshine kit manufactured by American Copper Works. A DIY Kit is 20 oz. Sheet copper which is cut, bent, rolled and in embossed which leaves it ready to solder. Clamping and Soldering of the pieces is what is needed to complete the moonshine still.

This is not a project where you just solder the tubing pieces and you're done. This is a project that will take at least 4 to 8 hours to complete. When we get the copper in our shop, we measure it, cut it, bend it, roll it into a cylinder shape, emboss it and ship it to the customer ready to clamp and solder.

We include the flux and solder in the box as well as all the parts and fittings that you need to finish the unit. We do not include the propane tank the torch head for the propane tank.

You can save a bunch of money with our moonshine kits. We specialize in 2 gallon kits all the way up to 100 gallon moonshine kits where the customer can actually save themselves hundreds of dollars.

Once again this project is not easy. We estimate that it will take the average customer 4 to 8 hours to clamp and solder and complete the unit. You can check out our video on www.moonshinekits.com which is a 36 minute tutorial video as well as you can check out "KitBookLet) Which is an instruction booklet built for our customers. Thank you for being a part of American Copper Works.

Even a 30 gallon still barely takes 2 sheets of copper. Do not be fooled by companies selling severely overpriced copper. The truth is that their prices are high because they don't want your sale, they cant even handle their current work load. We have spent the past 14 years offering high quality distillers at the lowest possible prices and we feel offended that these companies would straight up rip you off like this. Waiting 3 months for a copper still is like giving someone an interest free loan for 3 months. I highly suggest you purchase your copper still from our company. To prove how dedicated we are to your purchase we are now offering a free 1.5 gallon mini still with every purchase over $1000. To claim your offer all you need to do is text 1-603-997-6786 with your invoice number and ask for your free still!!! Do not waste your money with our competitors. Our manufacturing techniques are so far ahead of the game, LIGHTYEARS ahead. Do not be fooled into thinking a high priced copper still means high quality. Look at their warranty!!! We are the only company who has offered a lifetime warranty and stood behind it, since day 1.

How to build a 15 Gallon Moonshine Still Step by Step from a Home Distilling Kit

Click here to gain access to our moonshine kit booklet (Bookitlet) page

Click below to get access to a pdf very own moonshine kit booklet (Bookitlet)

Please check out the complete description of each of our sizes on our websites. For example if you are interested in a 6 gallon DIY Kit and are wondering the measurements of a 6 gallon Moonshine Still you can check out our listing on any of our websites to see the specific measurements and specifications of the 6 gallon unit.

Please keep in mind that all of our units come with the Upgraded Thumper and Worm kit. The Thumper is 9" by 9" cylindrically and the worm is a little bit bigger. The coil is 3/8 coil and the tubing is 1/2 inch tube. The thickness of the copper used is 20 oz. / 22 gauge copper sheet purchased from Paul Revere out of Boston Mass which is 99.9% pure.

Even a 30 gallon still barely takes 2 sheets of copper. Do not be fooled by companies selling severely overpriced copper. The truth is that their prices are high because they don't want your sale, they cant even handle their current work load. We have spent the past 14 years offering high quality distillers at the lowest possible prices and we feel offended that these companies would straight up rip you off like this. Waiting 3 months for a copper still is like giving someone an interest free loan for 3 months. I highly suggest you purchase your copper still from our company. To prove how dedicated we are to your purchase we are now offering a free 1.5 gallon mini still with every purchase over $600. To claim your offer all you need to do is text 1-603-997-6786 with your invoice number and ask for your free still!!! Do not waste your money with our competitors. Our manufacturing techniques are so far ahead of the game, LIGHTYEARS ahead. Do not be fooled into thinking a high priced copper still means high quality. Look at their warranty!!! We are the only company who has offered a lifetime warranty and stood behind it, since day 1.

All models are our base models, the same ones we have been building for the past 14 years. Over the years we have developed add-ons which we know you will love. Let’s talk about your first or last Made In America Copper Moonshine Still.

Call Us OR TEXT US 24/7

1-502-337-3944

Shipping

Free Shipping to Continental USA. Worldwide Shipping Available.

Delivery

🚀 Prime Shipping: 10 Day Guarantee

We’re redefining speed and efficiency! Thanks to cutting-edge improvements at our facility, your orders now ship faster than ever.

⏱️ Here’s Our Promise.

Every order ships within 10 Days.
If it doesn’t? We’ve got you covered with an automatic refund.

⚡ It’s simple. It’s fast. It’s the future.
10 Days Out the Door – Guaranteed.

Why wait? Shop now and experience tomorrow’s standards, today.

Putting together your 15 Gallon Moonshine Still

INSTRUCTIONS

1. Open your box.

2. Place pot on a table with temperature gage towards left hand side.

3. Take the smallest piece of the thumper with drain plug facing towards you and put to the right of the pot.

4. Take the worm which is attached to coil and put to the right of the thumper.

The Distillery Network Moonshine Still Instructions

5. Take the cap and insert it to the top of the pot, the bottom of the cap connects by spinning the spin fittings to the left side of the thumper.

A) The seam on the top of cap should interlock with seam of the back of the pot.

The Distillery Network Moonshine Still Instructions

6. When connecting the spin fitting, if they should leak, use thread locking tape or wheat paste. The unit also comes with an adapter piece which is copper, and it connects to the top of right hand side of the thumper and goes to the worm spin fittings accordingly.

The Distillery Network Moonshine Still Instructions

7. Congratulations! You have successfully assembled your Moonshine Still but you still need to know how to use it.

8. You need a burner or any source of flame, you could also have a submerged heating element. Once you have a burner and propane you need some MASH. Mash is what you put in the still to get liquor.

9. MASH= Fermented materials that can range anywhere between 1% to 35% ABV (Alcohol By Volume). The higher the ABV, the more alcohol you will be able to pull out. The goal is to take out as much alcohol out of the mash with your Moonshine Still.

VISIT: WWW.MASH.RECIPES FOR SOME EASY MOONSHINE RECIPES TO GET STARTED.

You are going to need a Hydrometer, which measures the alcohol content of the Mash, ‘cause it’s always nice to know what your alcohol is in the beginning and the end of the process. There are two different types of Hydrometers, one to use for low proof (of Mash) and one for high proof. Visit our accessory page to purchase more items from us.

10. Strain Mash for any hard materials and pour into pot. You are going to need to seal the cap of the pot with “old school” Wheat Paste or Black Electrical Tape, make sure to seal the unit well. The thumper is a double purification unit, it is not a necessity. We want you to run the Thumper dry (meaning, do not add anything in it) until you know what you are doing. All our units are interchangeable, which means you can take the Thumper out and run it directly from the pot to the worm with the coil.

11. Your Worm, the one with the coil, needs constant ow of cool water (we recommend continuously filling it with ice) you can also get an upgraded Thumper and Worm Kit with any of our units which will give you 2 hoses to run water in and out.

12. Put a flame underneath the Pot until the unit starts to “work”; as soon as the Worm is dripping product, write the temperature down then add 20 degrees to it, “That is your Operating Range”. Always keep still within this range to make sure H2O does not go into your product.

13. Your Thumper will fill up with Liquid and eventually stop the distillation process. You will need to disregard the Thumper’s content or save and re-run in your next batch.

14. Do Not just go and start drinking what comes out of the unit. Please do the appropriate amount of research to make sure you disregard the appropriate amount of your distillate before drinking.

NOW YOU KNOW HOW TO PROPERLY USE YOUR NEW MOONSHINE STILL.

___________________________________________________________________________________________

American Copper Works operates 5 locations across the east coast located in NH, TN, KY, NC, and GA who builds moonshine stills and ships them world wide. If you are close to one of these states please let us know if you want to receive your order from our shops in NH, TN, KY, NC, or GA. We are happy to offer you the service of customer pick up but also a more personalized and custom order experience. Please reach out directly to our sales representative and ask for more information by calling 1-502-337-3944 and pressing 1. We also accept text messages on this line so please text us about our products and communicate to us what we can build for you.

Our units can be upgraded with an ez seal cap on the pot as well as a 4 inch port on the thumper. These two add ons are optional and not mandatory. These two add ons make your unit more efficient and effective. The easy seal cap makes it so you don’t need to apply wheat or flour paste on the pot to seal it every time. You wont need to clean up any messy paste because you will have a food safe silicone gasket and a stainless steel butterfly clamp and 4 inch stainless ferrule added on the top of your pot. This way you can seal your unit for the distillation process by a clamping system instead of the old school paste method. Sealing it this way is highly efficient. You can also add on the 4 inch port on the thumper as well. It’s the same set up, 4 inch tri clamp, 4 inch gasket, 4 inch stainless ferrule and 4 inch stainless cap but this time it’s installed on the top of the thumper so you can infuse different flavors into your product. Having the 4 inch port added on to the thumper also makes it a lot easier to clean the thumper when you decide to run different flavors through the distiller. If you see the words “top end” model on any of our websites, that is the model with the ez seal cap and 4 inch port on the thumper. If you want to make sure your order has these add ons or any other custom requests please call 1-502-337-3944 and press 1. We also accept text messages on this line so please text us about our products and communicate to us what we can build for you.